Fix My Beep logo Fix My Beep Blog
Download on the App Store Get it on Google Play fixmybeep.com
Boilers

Worcester Bosch Boiler F.24 Error Code: What It Means and How to Fix It

Fix My Beep
By Phil Calver · Fix My Beep Editorial Team Published July 3, 2026 · Last reviewed July 3, 2026
🚨 WARNING: Never attempt DIY repairs on gas boilers or gas appliances.This is illegal without Gas Safe registration and potentially fatal. Call a Gas Safe registered engineer.

Boiler

F.24

The F.24 error code on a Worcester Bosch boiler indicates that the flow temperature is rising too quickly — a fault the boiler takes seriously enough to lock out for safety. It’s not an emergency, but you should not ignore it or keep resetting without investigating.

What does this error mean?

Worcester Bosch boilers continuously monitor how fast the water temperature rises inside the heat exchanger. When the flow temperature climbs too rapidly — faster than the boiler’s programmed safe limit — it triggers F.24 and shuts down to prevent overheating. This is a protective lockout, meaning the boiler will not restart on its own; it needs a manual reset after the underlying fault is addressed.

💰

Est. repair cost

£80–£350 for most common causes (sensor, pump, or power flush); new boiler £1,800–£2,800 installed

🔍 Likely causes

Low system water pressure (below 1 bar) reducing water flow through the heat exchanger, causing localised overheatingA faulty or stuck pump not circulating water around the heating circuit fast enoughBlocked or partially closed radiator valves (TRVs or lockshield valves) restricting water flowSludge or scale build-up inside the heat exchanger restricting flow, common in older systems without inhibitorA faulty flow temperature sensor (NTC thermistor) sending incorrect readings to the PCBAir trapped in the system reducing the volume of water available for circulation

🛠️ Step-by-step fix

1

Check the boiler pressure gauge — it should read between 1 and 1.5 bar when cold. If it’s below 1 bar, repressurise the system using the filling loop (see your boiler manual for instructions specific to your model).

2

Bleed any radiators that feel cold at the top to release trapped air. Start with upstairs radiators first, then downstairs.

3

Check that all radiator valves — both TRVs and lockshield valves — are fully open. A partially closed valve anywhere on the circuit can restrict flow enough to trigger F.24.

4

Once you’ve checked pressure, bled radiators, and confirmed valves are open, press the reset button on the boiler (usually a flame symbol with a line through it). Hold for 3 seconds. If the boiler fires up and runs normally, monitor it over the next 24–48 hours.

5

If the fault returns after resetting, do not continue resetting. Repeated lockouts risk further damage and the root cause — pump failure, heat exchanger blockage, or a faulty sensor — requires a Gas Safe registered engineer to diagnose.

📞 When to call a professional

If the F.24 error returns after a reset, or if the pressure and radiators appear normal, call a Gas Safe registered engineer — this is a legal requirement for any internal boiler work in the UK. Tell them the exact fault code (F.24), how many times it has locked out, and the age and model of your boiler (e.g. Worcester Bosch Greenstar 30i). Do not attempt to open the boiler casing or touch internal components yourself.

⚖️ Repair or replace?

A pump replacement typically costs £200–£350 including labour; a heat exchanger descale or power flush runs £300–£500 depending on system size; an NTC sensor replacement is usually £80–£150. If your Worcester Bosch boiler is over 10–12 years old and has required repeated repairs, a new A-rated boiler (£1,800–£2,800 installed) is likely more cost-effective than continued repair. For boilers under 8 years old, repair is almost always the right call.

⚠️ This guide is for informational purposes only and does not constitute professional repair advice. Always consult a qualified engineer for gas appliances. Gas appliance repairs must only be carried out by a Gas Safe registered engineer — it is illegal for unqualified persons to work on gas appliances in the UK. Repair costs are estimates based on typical UK market rates and may vary significantly. Fix My Beep and Rosetta Software Limited accept no liability for any loss, damage, injury or death resulting from following guidance on this website. Read our full disclaimer →

Get an instant AI diagnosis

Download Fix My Beep — free on iOS. Point your phone at any error code and get a step-by-step fix in seconds.

Download on the App Store Get it on Google Play
🌐 Visit fixmybeep.com

Related Error Code Guides

Boilers

Baxi Boiler E168 Error Code: What It Means and What to Do

The E168 error code on a Baxi boiler indicates a fan or air pressure…

Boilers

Worcester Bosch Boiler E32 Error Code: What It Means and What to Do

The E32 error code on a Worcester Bosch boiler indicates a fault with the…

Boilers

Glow-worm Boiler E7 Error Code: What It Means and What to Do

The E7 error code on a Glow-worm boiler indicates a fault with the fan…

Boilers

Glow-worm Boiler E19 Error Code: What It Means and How to Fix It

The E19 error code on a Glow-worm boiler indicates a fan or air pressure…

Fix My Beep

Fix My Beep Editorial Team

Fix My Beep is an AI-powered appliance diagnostic platform developed by Rosetta Software Limited. Our error code guides are generated using AI and reviewed by our editorial team to ensure accuracy and safety. Always consult a qualified engineer for safety-critical repairs, especially gas appliances. Learn more about us.

Fix My Beep

Fix My Beep App

Instant AI appliance diagnosis. Free on iOS & Android.

Download on the App Store Get it on Google Play fixmybeep.com

Browse by Appliance

  • Washing Machines
  • Dishwashers
  • Boilers
  • Ovens
  • Fridges
  • Tumble Dryers
  • Air Fryers

Recent Posts

  • Alpha Boiler F12 Error Code: What It Means and How to Fix It
  • AEG Dishwasher E8 Error Code: What It Means and How to Fix It
  • Siemens Tumble Dryer F16 Error Code: What It Means and How to Fix It
  • Candy Oven F7 Error Code: What It Means and How to Fix It
  • Miele Oven F7 Error Code: What It Means and How to Fix It

Recent Comments

No comments to show.

Archives

  • July 2026
  • June 2026

Categories

  • Air Fryers
  • Boilers
  • Cookers
  • Dishwashers
  • Freezers
  • Fridges
  • Ovens
  • Tumble Dryers
  • Washing Machines
Fix My Beep logo Fix My Beep

AI-powered appliance error code diagnosis. Decode every beep, flash, and fault code.

Appliances

  • Washing Machines
  • Dishwashers
  • Boilers
  • Ovens
  • Fridges
  • Tumble Dryers
  • Air Fryers

Get the App

  • Download on iOS
  • Get it on Google Play
  • Visit fixmybeep.com
© 2026 Fix My Beep. All rights reserved. · Disclaimer
Fix My Beep is a product of Rosetta Software Limited
Registered in England & Wales — Company No. 05930333
Registered office: 3 First Floor, Hornton Place, London, England, W8 4LZ
Download on the App Store Get it on Google Play
⚠️ All information on this site is generated by AI and provided for guidance only. Use at your own risk. Always consult a qualified engineer for safety-critical repairs. Read our full disclaimer.